Módulo GPS GY-NEO6MV2 Controle c/ Eprom + Antena (U-BLOX)

GPS Module NEO-6M  Model: GY-GPS6MV2  Input Supply Voltage Range: 3.3V-6V, on board voltage regulator maintains 3.3V  I/O Maximum Logic Level: 3.6V  WAAS (Wide Area Augmentation System) enabled GPS unit.  27 seconds to first fix (TTFF) for cold starts  On board LED will blink after module acquires a position fix and will continue blinking as long as the module has a fix  50 Channel NEMA GPS receiver  UART: 9600 baud by default, but is configurable from 4800 to 115200 baud  5Hz max update rate  External EEPROM for configuration storage  Four plated mounting holes, 3mm in diameter  One additional non-plated mounting/antenna cable hole, 4mm in diameter  Position Accuracy: 2 m and better with multiple good satellite signals  Velocity Accuracy: 0.1 m/s  Maximum Velocity: 500 m/s  Heading Accuracy: 0.5 degrees while moving  On board battery for battery backed RAM (BBR). Battery is recharged through a simple diode and resistor charger circuit from the on board voltage regulator´s 3.3V output  Ceramic antenna  -156dBm Hotstart sensitivity  Weight: 17.6g (0.6oz)  Dimensions of GPS Module: 36mm (1.42in) x 25.8mm (1.02in) x 4mm (0.16in)  Dimensions of Antenna: 25.5mm (1in) x 25.5mm (1in) x 8.8mm (0.35in)  Compatible with various flight control modules that provide GPS computer test software  Compatible with UART capable devices including Arduino, Raspberry Pi, MSP430, and MSP432.  Interface: RS232 TTL